G203 water does not leak
Classification:
Keywords: G203 water does not leak
immediate consultationDetailed description
Product Introduction
Zhuozhongzhizhong® G203 Water-Stop (Fast Setting) is an inorganic waterproof sealing material with high moisture resistance, anti-seepage, and strong adhesion. It can be used by mixing with water in a certain proportion. Its outstanding feature is anti-seepage sealing, ensuring no worries about water leakage. The product is non-toxic and environmentally friendly, representing a new generation of eco-friendly waterproof materials.
Usage Instructions
1. Substrate Treatment: The substrate should be moist, firm, clean, and flat. Uneven areas should be leveled first (you can use "Slow Setting Water-Stop" mixed with 2 times the weight of medium sand for leveling). If the substrate has severe seepage, drainage holes should be drilled at appropriate locations to relieve pressure and concentrate the seepage.
2. Mixing: Mix G203 Water-Stop (Fast Setting) in a ratio of powder: water = 1:0.3~0.35 for about 1-2 minutes until it becomes a uniform paste (without raw powder or lumps). The mixing should not exceed 5 minutes until the construction is completed. Do not mix too much at once to avoid waste due to solidification.
3. Application: Clean the substrate with water and dry it with a cloth, then quickly apply the first layer; after the first layer hardens (no fingerprints left), dry the surface and apply the second layer until it is leak-proof. Apply with some force and spread back and forth several times to ensure the coating is dense, while paying attention to overlaps. Total coating thickness: about 1.5cm for two layers; about 2.2cm for three layers, with a material usage of 1.2kg/㎡ per layer.
4. Moisture Maintenance: After the coating hardens (no fingerprints left), immediately carry out moisture maintenance. The first maintenance should be done carefully to avoid damaging the coating, with a total maintenance period of 2-3 days. Maintenance methods include spraying water, covering with wet materials, etc. In particularly humid areas (e.g., flooded basements), moisture maintenance can be omitted.
Applicable Scope
1. Suitable for anti-seepage sealing and waterproof reinforcement at various pipeline, floor drain, and other joint locations.
2. Leveling treatment, substrate repair, and arc treatment of corners before waterproof construction.
3. The preferred material for pasting tiles, mosaics, marble, and other blocks, allowing waterproofing and adhesion to be completed in one step.
Precautions
1. When the temperature is below 10℃, for quick sealing, warm water (around 40℃) can be used for mixing.
2. The product should be stored in a cool, dry warehouse, and protected from sunlight. Prevent damage to the packaging.
Top of the Window
Bottom of the Window
3. In humid environments, if there is a large area of visible water on the waterproof layer without construction quality issues, this is usually due to condensation from moisture, which will naturally disappear once the construction site dries.
Packaging Specification4kg/bag, 20kg/box
Implementation StandardGB 23440-2009
Previous Page
Product Consulting